Skip to main content
The Apps Home Page
Updated this week

The home page is divided into different categories for easy navigation. Additionally it also displays the door status of the coop door for easy checking and any possible warning messages.

WiFi Signal Strength

The strength of your home WiFi is indicated here. If the signal is low, try repositioning the HomeHub so that it has better access to your home wifi network.

Coop Selector

You may have up to four door openers attached to the App with each colour inidicating the status of each coop.

The Coop Door is Open

The Coop Door is Closed

An error has been detected

Not in Use

Radio RSSI

The signal strength of the Radio Link is displayed here. The lower the number, the better the signal quality. For example -21dBm would be concidered a very good signal strength but a reading of -95dBm would be concidered a low signal strength. To help increase the signal strength you can elevate the Radio Receiver on the coop and also posotion the HomeHub in a higher location. Remember that heavy foliage and other obsticales will effect the overall signal quality.

Coop Status Info Panel

The status of the coop is displayed in the area. Alerts are also displayed in this panel when necessary.

Coop Control

To change any of the settings for your door opener or to check on the status of the coop, press the Enter button.

Eggs Today

To help you keep track of how your girls are doing, to can use this tracker to enter their daily egg count.

Solar Power and Battery Monitoring

You may keep an eye on the performance of your solar panel and/or the state of the batteries all displayed in a helpful graphical format.

Open and Close Chart

This displays the daily open and close time of the door in addition to the light sensor reading. This can be useful to track when the door closes relative to the daylight hours.

General Settings

You may change/update the background proccesses from here such as changing the email messaging or enabling/disabling the HomeHub LED from here.

Radio Setup

Access the Radio Settings from here.

CAUTION: Once your device has been setup, you should not need to access this page as any changes here will also have to be made on your physical ChickenGuard as well

Did this answer your question?