Email Alerts
By default, when the door opens or closes an email is sent to your registered email address. To turn this functionality on or off, press the button. Green = On/ Red = Off
HomeHub LED
The HomeHub has an LED that "breaths" during normal operation. This LED also acts as a warning indicator by flashing red when an issue arises.
Should you want to turn this "breathing" off, simply disable it by pressing the button however, should an alarm situation occur, the LED will still flash as a warning.
Sensor Delay
The Sensor Delay feature enables you to delay the opening or closing of the door when using the onboard light sensor by up to 60 minutes. By default, this feature is disabled. To enable this feature, press the button.
Door Calibration
Only available when using the App with the All-in-One door opener
To start the Door Calibration proccess, press to button.
Extreme care should be taken when using this feature as no safety mechanisms are enabled during the calibration proccess and there is adanger that animals could get trapped whislt the door is closing.
Automatic Time Update
The App by default will update the time on your ChickeGuard once every hour to make sure that it is always accurate. It will also update for when the clocks change. To view your local time, this is displayed at #6.
To disable this feature, press the button.
Serial Monitor
Communication with the ChickenGuard is made via the Radio Link. For those that would like to see what is being transmitted and received, the Serial Monitor gives a line by line summary of all events.