The options you'll find in the App's Misc Settings are a little different to the options you'll find in the Door Opener's Misc Settings.
Sensor Delay
"Sensor Delay" is where you can turn on or off the Sensor Delay feature, which allows you to delay the Open or Close cycle by up to 60 minutes when using the Sensor option.
When the screen reads "Sensor Delay", tap the MENU button to enter the setting.
Use the up and down arrow buttons to switch between ON or OFF, then tap the MENU button to save the setting.
Then, when selecting "Sensor" inside your Open Settings or Close Settings, you will be given the option to increase or decrease the delay period.
Calibrate Door
The "Calibrate Door" option allows you to carry out an Automatic Calibration.
Automatic Calibration is the only option for calibrating an All-in-One model, but S5 and PRO models can be calibrated both manually and automatically.
DO NOT use this option if your door is set to use "Manual Calibration". Before you can complete a Calibration through the App, you must set your Door Opener to "Automatic Calibration".
Learn more about Calibration Types in the article titled "Switching between Manual and Automatic Calibration types".
Radio Comms
Navigating to the "Radio Comms" option allows you to view your Link ID and make changes to the Radio Communications settings.
EXIT
"EXIT" is the last option inside any area of the Settings Menu. Tapping the MENU button when "EXIT" is on the screen will close the Settings Menu and take you back to the home Page.
Need further assistance?